Accounting

These scenarios show accounting feature when secure mode is enabled. All logs are stored in file: running://log/user/audit_file/audit_file

File Logs

Description

Show different logs stored in audit file

Scenario

Step 1: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Secure mode started

Step 2: Run command show running at DUT0 and expect this output:

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' executed a new command: 'show running'

Step 4: Set the following configuration in DUT0 :

set system cli configuration logging cli info
set system login user admin authentication encrypted-password '$6$gKn2L5STwyTqsZWz$oVJHj67NUiXGJxljpuiXEtihNkGARsHalbS/p6mL3Dn2YBK69IaWF8GgAE8h0b/9EIokc/oIYJZd7mAYcvmya1'
set system security medium

Step 5: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' committed the configuration

Hidden Passwords

Description

Plain passwords are not displayed

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.215.168.64/24
set system aaa server tacacs TAC1 address 10.215.168.1
set system aaa server tacacs TAC1 encrypted-key U2FsdGVkX1++A4UyRVLSkksAqCGOyuLGDxfT+8ZXM4Y=
set system login user admin authentication encrypted-password '$6$4zQmK11EF9k4cxMI$Yl3uCdSk8XZliW/T5foBEhlpSU2KQPYAewIg8aujQJnoWTYH/iN84X7dCbph7C9g/37e0DqlH9Nzw.x9sCLRm/'
set system security medium

Step 2: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

User 'admin' added a new cfg line: 'set system aaa server tacacs TAC1 key ******'

Audit file permissions

Description

Non admin user is allowed to open audit file

Scenario

Step 1: Set the following configuration in DUT0 :

set system login role cfg level 10
set system login user admin authentication encrypted-password '$6$rbSeC/8EIUvtKdhg$qqQ/y.LqDhdBcyxG7TU.ZZeqiQFJQDmr.A5AAR2UcKtX4aQFb56sVHH/6j5k748PAE182Br7D5KZQZaCovfUW.'
set system login user test authentication encrypted-password '$6$crO/mTb8ZC/CMtqQ$vdd1QMzKvJQfHeolr22a0TBETK3qYeZlurXexdkjVgODl2R8Y934IEywWSqxEoFoXkKoDHSXUemBQZbN6A5dL.'
set system login user test role cfg
set system security medium

Step 2: Login as test with password tEst!2qqqqqq

Step 3: Run command file show running://log/user/audit_file/audit_file at DUT0 and check if output contains the following tokens:

Permission denied