Ppk
This set of tests shows how to configure and connect more than two subnets with each other through a VPN tunnel using PPK authentication in different ways.
Test PPK Options
Description
In this test, we will check the different options for PPK authentication (i.e., when it is required or not, when it remains unmatched, etc.).
Scenario
Note
Set default configuration for both DUTs, where PPK is not required and the PPK is the same.
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX1/Fh6t6fJBDBEluDK20ksW8qHaDWq9fLGY= set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX18ZM8loISUptXAUDJmrYI1V0x85XyccyCE= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap %any type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX18kPWAzPiZsrAOY1QDAgWWNZMpCGBYya5Q= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.023 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.023/0.023/0.023/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.039 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms
Step 5: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 8e2539d5d28d2920_i b807b1b8be5e36c1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 16758s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3267s, expires in 3960s in ce09629e, 0 bytes, 0 packets out cf993477, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 6: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.355 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.355/0.355/0.355/0.000 ms
Step 7: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.683 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.683/0.683/0.683/0.000 ms
Step 8: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 8e2539d5d28d2920_i b807b1b8be5e36c1_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 16758s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3267s, expires in 3960s in ce09629e, 168 bytes, 2 packets, 0s ago out cf993477, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Delete the PPK from DUT0 and check that the SA falls back to standard authentication.
Step 9: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org
Step 10: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
1 tunnel(s) reset for peer PEER
Step 11: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
1 tunnel(s) reset for peer PEER
Step 12: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 999431c072d1b169_i 5643dafe03a230c3_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 17915s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3311s, expires in 3960s in c92f6d2a, 0 bytes, 0 packets out c0675434, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 13: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.381 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.381/0.381/0.381/0.000 ms
Step 14: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.360 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.360/0.360/0.360/0.000 ms
Step 15: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #3, ESTABLISHED, IKEv2, 999431c072d1b169_i 5643dafe03a230c3_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256 established 0s ago, rekeying in 17915s peer-PEER-tunnel-1: #3, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3311s, expires in 3960s in c92f6d2a, 168 bytes, 2 packets, 0s ago out c0675434, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Note
Set the PPK as required in DUT0 and, with DUT1’s corresponding PPK deleted, check that the connection fails.
Step 16: Modify the following configuration lines in DUT0 :
set vpn ipsec auth-profile AUTH-SA remote ppk required
Step 17: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed 0 tunnel(s) reset for peer PEER
Step 18: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed 0 tunnel(s) reset for peer PEER
Step 19: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Note
Set the PPK as required in DUT1 and change the PPK in DUT0 back to not required. Check that the connection is still failing.
Step 20: Modify the following configuration lines in DUT0 :
delete vpn ipsec auth-profile AUTH-SA remote ppk required
Step 21: Modify the following configuration lines in DUT1 :
set vpn ipsec auth-profile AUTH-SA local ppk required
Step 22: Run command vpn ipsec clear peer PEER at DUT0 and expect this output:
Show output
terminate failed: no matching SAs to terminate found initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed 0 tunnel(s) reset for peer PEER
Step 23: Run command vpn ipsec clear peer PEER at DUT1 and expect this output:
Show output
terminate failed: no matching SAs to terminate found initiate failed: establishing CHILD_SA 'peer-PEER-tunnel-1' failed 0 tunnel(s) reset for peer PEER
Step 24: Expect a failure in the following command:
Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. --- 10.2.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms
Test PPK EAP-TTLS STS
Description
Test the site-to-site VPN with PPK authentication and EAP-TTLS
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX1/WORdNZ4mcq+sxNbJJciXJSKSVAIZySwo= set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX18br4L/FLr8MNfw5/3+RQKWlZJoTWEj/4E= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth eap %any type ttls set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap carol encrypted-secret U2FsdGVkX1+EoYlOX5dslsEnvofFy5BhOXq1Oi3+aIQ= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth eap carol type ttls set vpn ipsec auth-profile AUTH-SA local id carol set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.286 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.286/0.286/0.286/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.029 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.029/0.029/0.029/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets eap dave encrypted-secret U2FsdGVkX1+xn+NN7P+cc9W9TVm4A38FRBKaJbMopl8= set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth eap dave type ttls set vpn ipsec auth-profile AUTH-SA local id dave set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.466 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.466/0.466/0.466/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, de70df196273f0a6_i f078e2fd7fc145a4_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 17232s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 3494s, expires in 3957s in c24fea52, 0 bytes, 0 packets out c2b54565, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1009600df6bda5c7_i 5eb086e8b5cde5c0_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 25731s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3357s, expires in 3960s in cf796e20, 84 bytes, 1 packets, 0s ago out cae0bed0, 84 bytes, 1 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.709 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.709/0.709/0.709/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.385 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.385/0.385/0.385/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, de70df196273f0a6_i f078e2fd7fc145a4_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 17231s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3493s, expires in 3956s in c24fea52, 168 bytes, 2 packets, 0s ago out c2b54565, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1009600df6bda5c7_i 5eb086e8b5cde5c0_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 25730s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3356s, expires in 3959s in cf796e20, 84 bytes, 1 packets, 1s ago out cae0bed0, 84 bytes, 1 packets, 1s ago local 10.1.0.0/24 remote 10.3.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, de70df196273f0a6_i f078e2fd7fc145a4_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 17231s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3493s, expires in 3956s in c24fea52, 168 bytes, 2 packets, 0s ago out c2b54565, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1009600df6bda5c7_i 5eb086e8b5cde5c0_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 25730s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3356s, expires in 3959s in cf796e20, 84 bytes, 1 packets, 1s ago out cae0bed0, 84 bytes, 1 packets, 1s ago local 10.1.0.0/24 remote 10.3.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.635 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.635/0.635/0.635/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.624 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.624/0.624/0.624/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, de70df196273f0a6_i f078e2fd7fc145a4_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'carol' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 17225s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3487s, expires in 3950s in c24fea52, 168 bytes, 2 packets, 6s ago out c2b54565, 168 bytes, 2 packets, 6s ago local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 1009600df6bda5c7_i 5eb086e8b5cde5c0_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'dave' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 7s ago, rekeying in 25724s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 7s ago, rekeying in 3350s, expires in 3953s in cf796e20, 252 bytes, 3 packets, 0s ago out cae0bed0, 252 bytes, 3 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24
Test PPK PSK STS
Description
Test the site-to-site VPN with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk test encrypted-secret U2FsdGVkX18LJ97gTrI573funNqfdg2vFJ63CsHpSmU= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id test set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk test encrypted-secret U2FsdGVkX1/Ie5A8JV3jNg8DoOENVsjo/a2iGULrRno= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id test set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.024 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.024/0.024/0.024/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.030 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.030/0.030/0.030/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk test encrypted-secret U2FsdGVkX19qw5fQqZ/yQHMG37oyyAS5XHPPuWXsL2s= set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id test set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.268 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.268/0.268/0.268/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, c58214c8440278bb_i 914fd8f33b2e33ec_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 22941s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 3436s, expires in 3957s in c85a93b2, 0 bytes, 0 packets out c4906b31, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 05c14309af9a0517_i eccdd82356b22f5d_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 19827s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3423s, expires in 3960s in c6a64e74, 84 bytes, 1 packets, 1s ago out ce7ed9b4, 84 bytes, 1 packets, 1s ago local 10.1.0.0/24 remote 10.3.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.245 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.245/0.245/0.245/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.413 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.413/0.413/0.413/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, c58214c8440278bb_i 914fd8f33b2e33ec_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 22941s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 3436s, expires in 3957s in c85a93b2, 168 bytes, 2 packets, 0s ago out c4906b31, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 05c14309af9a0517_i eccdd82356b22f5d_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 19827s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3423s, expires in 3960s in c6a64e74, 84 bytes, 1 packets, 1s ago out ce7ed9b4, 84 bytes, 1 packets, 1s ago local 10.1.0.0/24 remote 10.3.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, c58214c8440278bb_i 914fd8f33b2e33ec_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 3s ago, rekeying in 22941s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 3s ago, rekeying in 3436s, expires in 3957s in c85a93b2, 168 bytes, 2 packets, 0s ago out c4906b31, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 05c14309af9a0517_i eccdd82356b22f5d_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 19827s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 3423s, expires in 3960s in c6a64e74, 84 bytes, 1 packets, 1s ago out ce7ed9b4, 84 bytes, 1 packets, 1s ago local 10.1.0.0/24 remote 10.3.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.269 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.269/0.269/0.269/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.627 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.627/0.627/0.627/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #1, ESTABLISHED, IKEv2, c58214c8440278bb_i 914fd8f33b2e33ec_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 9s ago, rekeying in 22935s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 9s ago, rekeying in 3430s, expires in 3951s in c85a93b2, 168 bytes, 2 packets, 6s ago out c4906b31, 168 bytes, 2 packets, 6s ago local 10.1.0.0/24 remote 10.2.0.0/24 vpn-peer-PEER: #2, ESTABLISHED, IKEv2, 05c14309af9a0517_i eccdd82356b22f5d_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 6s ago, rekeying in 19821s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 6s ago, rekeying in 3417s, expires in 3954s in c6a64e74, 252 bytes, 3 packets, 0s ago out ce7ed9b4, 252 bytes, 3 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24
Test PPK RSA STS
Description
Test the site-to-site VPN with PPK authentication and RSA
Scenario
Step 1: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set protocols static route 10.2.0.0/24 interface dum0 set protocols static route 10.3.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type respond set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.1.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0
Step 2: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set protocols static route 10.1.0.0/24 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=carol@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.2 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.2.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 3: Ping IP address 80.0.0.2 from DUT1:
admin@DUT1$ ping 80.0.0.2 count 1 size 56 timeout 1Show output
PING 80.0.0.2 (80.0.0.2) 56(84) bytes of data. 64 bytes from 80.0.0.2: icmp_seq=1 ttl=64 time=0.265 ms --- 80.0.0.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.265/0.265/0.265/0.000 ms
Step 4: Ping IP address 80.0.0.1 from DUT0:
admin@DUT0$ ping 80.0.0.1 count 1 size 56 timeout 1Show output
PING 80.0.0.1 (80.0.0.1) 56(84) bytes of data. 64 bytes from 80.0.0.1: icmp_seq=1 ttl=64 time=0.024 ms --- 80.0.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.024/0.024/0.024/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set protocols static route 0.0.0.0/0 interface dum0 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=dave@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id dave@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec esp-group CHILD-SA mode tunnel set vpn ipsec esp-group CHILD-SA proposal 1 encryption aes256gcm128 set vpn ipsec esp-group CHILD-SA proposal 1 pfs dh-group19 set vpn ipsec ike-group IKE-SA key-exchange ikev2 set vpn ipsec ike-group IKE-SA proposal 1 dh-group 19 set vpn ipsec ike-group IKE-SA proposal 1 encryption aes256gcm128 set vpn ipsec ike-group IKE-SA proposal 1 hash sha256 set vpn ipsec logging log-types any log-level 1 set vpn ipsec site-to-site peer PEER auth-profile AUTH-SA set vpn ipsec site-to-site peer PEER connection-type initiate set vpn ipsec site-to-site peer PEER default-esp-group CHILD-SA set vpn ipsec site-to-site peer PEER ike-group IKE-SA set vpn ipsec site-to-site peer PEER local-address 80.0.0.3 set vpn ipsec site-to-site peer PEER remote-address 80.0.0.1 set vpn ipsec site-to-site peer PEER tunnel 1 local prefix 10.3.0.0/24 set vpn ipsec site-to-site peer PEER tunnel 1 local-interface dum0 set vpn ipsec site-to-site peer PEER tunnel 1 remote prefix 10.1.0.0/24
Step 6: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.507 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.507/0.507/0.507/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, ae6b3e532326bb56_i 238f267975b567aa_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 17489s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 3293s, expires in 3959s in c050f87c, 84 bytes, 1 packets, 0s ago out ca291900, 84 bytes, 1 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 0bfb9b6abf0100b6_i 73c1440ac7f55eed_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 4s ago, rekeying in 15221s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 4s ago, rekeying in 3319s, expires in 3956s in c0f6a56f, 0 bytes, 0 packets out cdd093f4, 0 bytes, 0 packets local 10.1.0.0/24 remote 10.2.0.0/24
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.389 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.389/0.389/0.389/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.507 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.507/0.507/0.507/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.2.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, ae6b3e532326bb56_i 238f267975b567aa_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 7s ago, rekeying in 17483s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 7s ago, rekeying in 3287s, expires in 3953s in c050f87c, 84 bytes, 1 packets, 6s ago out ca291900, 84 bytes, 1 packets, 6s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 0bfb9b6abf0100b6_i 73c1440ac7f55eed_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 10s ago, rekeying in 15215s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 10s ago, rekeying in 3313s, expires in 3950s in c0f6a56f, 168 bytes, 2 packets, 0s ago out cdd093f4, 168 bytes, 2 packets, 0s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, ae6b3e532326bb56_i 238f267975b567aa_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 17482s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3286s, expires in 3952s in c050f87c, 84 bytes, 1 packets, 7s ago out ca291900, 84 bytes, 1 packets, 7s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 0bfb9b6abf0100b6_i 73c1440ac7f55eed_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 11s ago, rekeying in 15214s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 11s ago, rekeying in 3312s, expires in 3949s in c0f6a56f, 168 bytes, 2 packets, 1s ago out cdd093f4, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.359 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.359/0.359/0.359/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.661 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.661/0.661/0.661/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+10.3.0.*Show output
vpn-peer-PEER: #2, ESTABLISHED, IKEv2, ae6b3e532326bb56_i 238f267975b567aa_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 8s ago, rekeying in 17482s peer-PEER-tunnel-1: #2, reqid 2, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 8s ago, rekeying in 3286s, expires in 3952s in c050f87c, 252 bytes, 3 packets, 0s ago out ca291900, 252 bytes, 3 packets, 0s ago local 10.1.0.0/24 remote 10.3.0.0/24 vpn-peer-PEER: #1, ESTABLISHED, IKEv2, 0bfb9b6abf0100b6_i 73c1440ac7f55eed_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 11s ago, rekeying in 15214s peer-PEER-tunnel-1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256 installed 11s ago, rekeying in 3312s, expires in 3949s in c0f6a56f, 168 bytes, 2 packets, 1s ago out cdd093f4, 168 bytes, 2 packets, 1s ago local 10.1.0.0/24 remote 10.2.0.0/24
Test PPK PSK DMVPN
Description
Test the DMVPN scenario with PPK authentication and PSK
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set interfaces tunnel tun0 address 10.0.0.2/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.2 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set protocols static route 10.1.0.0/24 next-hop 10.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk test encrypted-secret U2FsdGVkX1+biH5UfcgD5zmxfCfSVvEPC/umoQzJN34= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id test set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP mode transport set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 2: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set interfaces tunnel tun0 address 10.0.0.1/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.1 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 60 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp transport-nat-support set protocols static route 10.2.0.0/24 next-hop 10.0.0.2 set protocols static route 10.3.0.0/24 next-hop 10.0.0.3 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk test encrypted-secret U2FsdGVkX191DM+Nymyrx3k5SCu/H/jrVhjNhq25y1M= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id test set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP mode transport set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 3: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.599 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.599/0.599/0.599/0.000 ms
Step 4: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.284 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.284/0.284/0.284/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set interfaces tunnel tun0 address 10.0.0.3/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.3 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set protocols static route 10.1.0.0/24 next-hop 10.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ike-psk test encrypted-secret U2FsdGVkX18YkG7eKo4mmh+mv/BL68CnTYaAr29LaZY= set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local auth ike-psk id test set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote auth ike-psk id %any set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP mode transport set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 6: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.535 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.535/0.535/0.535/0.000 ms
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, c5a4ff4566a7dcf3_i c6e04039bd1b8dd8_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 13s ago, rekeying in 76166s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 13s ago, rekeying in 22063s, expires in 28787s in c3172e8b, 464 bytes, 5 packets, 9s ago out c03f9419, 292 bytes, 3 packets, 9s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, 1837367bc9489a60_i 768f4d480d7cdd7c_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 47617s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 16828s, expires in 28800s in c718052b, 184 bytes, 2 packets, 0s ago out cc6691cf, 204 bytes, 2 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.606 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.606/0.606/0.606/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.454 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.454/0.454/0.454/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0\.2Show output
IPSEC: #1, ESTABLISHED, IKEv2, c5a4ff4566a7dcf3_i c6e04039bd1b8dd8_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 13s ago, rekeying in 76166s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 13s ago, rekeying in 22063s, expires in 28787s in c3172e8b, 640 bytes, 7 packets, 0s ago out c03f9419, 468 bytes, 5 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, 1837367bc9489a60_i 768f4d480d7cdd7c_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 47617s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 16828s, expires in 28800s in c718052b, 184 bytes, 2 packets, 0s ago out cc6691cf, 204 bytes, 2 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, c5a4ff4566a7dcf3_i c6e04039bd1b8dd8_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 13s ago, rekeying in 76166s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 13s ago, rekeying in 22063s, expires in 28787s in c3172e8b, 640 bytes, 7 packets, 0s ago out c03f9419, 468 bytes, 5 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, 1837367bc9489a60_i 768f4d480d7cdd7c_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 47617s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 16828s, expires in 28800s in c718052b, 184 bytes, 2 packets, 0s ago out cc6691cf, 204 bytes, 2 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.516 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.516/0.516/0.516/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.620 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.620/0.620/0.620/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0\.3.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, c5a4ff4566a7dcf3_i c6e04039bd1b8dd8_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 13s ago, rekeying in 76166s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 13s ago, rekeying in 22063s, expires in 28787s in c3172e8b, 640 bytes, 7 packets, 0s ago out c03f9419, 468 bytes, 5 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, 1837367bc9489a60_i 768f4d480d7cdd7c_r* local 'test' @ 80.0.0.1[500] remote 'test' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 47617s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 16828s, expires in 28800s in c718052b, 360 bytes, 4 packets, 0s ago out cc6691cf, 380 bytes, 4 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]
Step 15: Run command protocols ip show nhrp at DUT0 and expect this output:
Show output
Iface Type Protocol NBMA Claimed NBMA Expires(s) Flags Identity tun0 local 10.0.0.1 80.0.0.1 80.0.0.1 - - tun0 dynamic 10.0.0.3 80.0.0.3 80.0.0.3 600 UTA test tun0 dynamic 10.0.0.2 80.0.0.2 80.0.0.2 590 UT test
Test PPK RSA DMVPN
Description
Test the DMVPN scenario with PPK authentication and RSA, with same ppk on both remotes.
Scenario
Step 1: Set the following configuration in DUT1 :
set interfaces dummy dum0 address 10.2.0.1/24 set interfaces ethernet eth0 address 80.0.0.2/24 set interfaces tunnel tun0 address 10.0.0.2/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.2 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set protocols static route 10.1.0.0/24 next-hop 10.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=carol@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP mode transport set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 2: Set the following configuration in DUT0 :
set interfaces dummy dum0 address 10.1.0.1/24 set interfaces ethernet eth0 address 80.0.0.1/24 set interfaces tunnel tun0 address 10.0.0.1/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.1 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 60 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp transport-nat-support set protocols static route 10.2.0.0/24 next-hop 10.0.0.2 set protocols static route 10.3.0.0/24 next-hop 10.0.0.3 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA global-secrets ppk dave@teldat.org file 'running://ppk_dave.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://server.crt' set vpn ipsec auth-profile AUTH-SA local id CN=moon.teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://server.priv.pem' set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote ppk id '*@teldat.org' set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP mode transport set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 3: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.733 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.733/0.733/0.733/0.000 ms
Step 4: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.239 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.239/0.239/0.239/0.000 ms
Step 5: Set the following configuration in DUT2 :
set interfaces dummy dum0 address 10.3.0.1/24 set interfaces ethernet eth0 address 80.0.0.3/24 set interfaces tunnel tun0 address 10.0.0.3/32 set interfaces tunnel tun0 encapsulation gre set interfaces tunnel tun0 local-address 80.0.0.3 set interfaces tunnel tun0 local-interface eth0 set interfaces tunnel tun0 mtu 1390 set interfaces tunnel tun0 nhrp holdtime 600 set interfaces tunnel tun0 nhrp ipsec IPSEC set interfaces tunnel tun0 nhrp nhs 10.0.0.1 nbma 80.0.0.1 set protocols static route 10.1.0.0/24 next-hop 10.0.0.1 set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0' set vpn ipsec auth-profile AUTH-SA global-secrets ppk carol@teldat.org file 'running://ppk_carol.key' set vpn ipsec auth-profile AUTH-SA local ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA local cert-file 'running://client.crt' set vpn ipsec auth-profile AUTH-SA local id CN=dave@teldat.org set vpn ipsec auth-profile AUTH-SA local key file 'running://client.priv.pem' set vpn ipsec auth-profile AUTH-SA local ppk id carol@teldat.org set vpn ipsec auth-profile AUTH-SA mirror-config false set vpn ipsec auth-profile AUTH-SA remote ca-cert-file 'running://ca.crt' set vpn ipsec auth-profile AUTH-SA remote id CN=moon.teldat.org set vpn ipsec dmvpn-profile IPSEC auth-profile AUTH-SA set vpn ipsec dmvpn-profile IPSEC esp-group ESP-GROUP set vpn ipsec dmvpn-profile IPSEC ike-group IKE-GROUP set vpn ipsec esp-group ESP-GROUP lifetime 28800 set vpn ipsec esp-group ESP-GROUP mode transport set vpn ipsec esp-group ESP-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec esp-group ESP-GROUP proposal 10 hash sha256 set vpn ipsec esp-group ESP-GROUP proposal 10 pfs dh-group19 set vpn ipsec ike-group IKE-GROUP key-exchange ikev2 set vpn ipsec ike-group IKE-GROUP lifetime 86400 set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group 19 set vpn ipsec ike-group IKE-GROUP proposal 10 encryption aes256gcm128 set vpn ipsec ike-group IKE-GROUP proposal 10 hash sha256 set vpn ipsec logging log-types any log-level 1
Step 6: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.536 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.536/0.536/0.536/0.000 ms
Warning
“Certificates must include the IP address in the SAN field, otherwise the connection will fail.”
Step 7: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 8abef419668f5df2_i 24397775ae16421b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 13s ago, rekeying in 73712s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 13s ago, rekeying in 16808s, expires in 28787s in c6825ba9, 464 bytes, 5 packets, 10s ago out c9dd0fe7, 292 bytes, 3 packets, 10s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, b336f003f438aa40_i 470b069303dcc7b8_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 0s ago, rekeying in 52712s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 0s ago, rekeying in 22099s, expires in 28800s in ce411bac, 184 bytes, 2 packets, 0s ago out c9dd8aef, 204 bytes, 2 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]
Step 8: Ping IP address 10.2.0.1 from DUT0:
admin@DUT0$ ping 10.2.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.2.0.1 (10.2.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.511 ms --- 10.2.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.511/0.511/0.511/0.000 ms
Step 9: Ping IP address 10.1.0.1 from DUT1:
admin@DUT1$ ping 10.1.0.1 local-address 10.2.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.2.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.413 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.413/0.413/0.413/0.000 ms
Step 10: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0\.2Show output
IPSEC: #1, ESTABLISHED, IKEv2, 8abef419668f5df2_i 24397775ae16421b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 14s ago, rekeying in 73711s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 14s ago, rekeying in 16807s, expires in 28786s in c6825ba9, 640 bytes, 7 packets, 0s ago out c9dd0fe7, 468 bytes, 5 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, b336f003f438aa40_i 470b069303dcc7b8_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 52711s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 22098s, expires in 28799s in ce411bac, 184 bytes, 2 packets, 1s ago out c9dd8aef, 204 bytes, 2 packets, 1s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]
Step 11: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*\s+.*remote\s+80.0.0.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 8abef419668f5df2_i 24397775ae16421b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 14s ago, rekeying in 73711s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 14s ago, rekeying in 16807s, expires in 28786s in c6825ba9, 640 bytes, 7 packets, 0s ago out c9dd0fe7, 468 bytes, 5 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, b336f003f438aa40_i 470b069303dcc7b8_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 52711s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 22098s, expires in 28799s in ce411bac, 184 bytes, 2 packets, 1s ago out c9dd8aef, 204 bytes, 2 packets, 1s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]
Step 12: Ping IP address 10.3.0.1 from DUT0:
admin@DUT0$ ping 10.3.0.1 local-address 10.1.0.1 count 1 size 56 timeout 1Show output
PING 10.3.0.1 (10.3.0.1) from 10.1.0.1 : 56(84) bytes of data. 64 bytes from 10.3.0.1: icmp_seq=1 ttl=64 time=0.309 ms --- 10.3.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.309/0.309/0.309/0.000 ms
Step 13: Ping IP address 10.1.0.1 from DUT2:
admin@DUT2$ ping 10.1.0.1 local-address 10.3.0.1 count 1 size 56 timeout 1Show output
PING 10.1.0.1 (10.1.0.1) from 10.3.0.1 : 56(84) bytes of data. 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.346 ms --- 10.1.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.346/0.346/0.346/0.000 ms
Step 14: Run command vpn ipsec show sa at DUT0 and check if output matches the following regular expressions:
(?m)\s+.*AES_GCM_16-256\/PRF_HMAC_SHA2_256\/ECP_256\/PPK.*\s+.*\s+.*\s+.*\s+.*[1-9]\d? packets.*\s+.*[1-9]\d? packets.*\s+.*\s+.*remote\s+80.0.0\.3.*Show output
IPSEC: #1, ESTABLISHED, IKEv2, 8abef419668f5df2_i 24397775ae16421b_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=carol@teldat.org' @ 80.0.0.2[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 14s ago, rekeying in 73711s IPSEC: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 14s ago, rekeying in 16807s, expires in 28786s in c6825ba9, 640 bytes, 7 packets, 0s ago out c9dd0fe7, 468 bytes, 5 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.2/32[gre] IPSEC: #2, ESTABLISHED, IKEv2, b336f003f438aa40_i 470b069303dcc7b8_r* local 'CN=moon.teldat.org' @ 80.0.0.1[500] remote 'CN=dave@teldat.org' @ 80.0.0.3[500] AES_GCM_16-256/PRF_HMAC_SHA2_256/ECP_256/PPK established 1s ago, rekeying in 52711s IPSEC: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 1s ago, rekeying in 22098s, expires in 28799s in ce411bac, 360 bytes, 4 packets, 0s ago out c9dd8aef, 380 bytes, 4 packets, 0s ago local 80.0.0.1/32[gre] remote 80.0.0.3/32[gre]