Check Connection

This scenario shows how to bind two Ethernet interfaces into a single “bonding” interface and check the link connectivity.

Test ICMP Connectivity

Description

A bonding interface is created in DUT0 by combinining two Ethernet interfaces. Once it’s configured, the ‘Ping’ command is used to check if there’s connectivity between both nodes.

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces bonding bond0 miimon 1
set interfaces bonding bond0 address 192.168.100.10/24
set interfaces ethernet eth0 bond-group bond0
set interfaces ethernet eth1 bond-group bond0

Step 2: Set the following configuration in DUT1:

set interfaces ethernet eth0 address 192.168.100.20/24

Step 3: Ping IP address 192.168.100.20 from DUT0:

admin@DUT0$ ping 192.168.100.20 count 1 size 56 timeout 1