Check Connection

This scenario shows how to configure two different kinds of interfaces: Cellular and Ethernet. Another device, DUT0, which is connected through the Ethernet cable, pings Google’s DNS public server using DUT0 as a gateway.

Test ICMP Connectivity

Description

DUT0 is connected to the LAN side through the ethernet eth0 interface, and to the WAN side through the cellular cell0 interface. cell0 masquerades outgoing traffic.

Scenario

Step 1: Set the following configuration in DUT0:

set interfaces cellular cell0 profile CELPROFILE
set interfaces cellular cell0 address dhcp
set interfaces cellular cell0 traffic nat source rule 1 address masquerade
set interfaces ethernet eth0 address 192.168.100.10/24
set cellular profile CELPROFILE apn movistar.es
set cellular profile CELPROFILE pin 9922

Step 2: Set the following configuration in DUT1:

set interfaces ethernet eth0 address 192.168.100.20/24
set protocols static route 0.0.0.0/0 next-hop 192.168.100.10

Step 3: Ping IP address 8.8.8.8 from DUT0:

admin@DUT0$ ping 8.8.8.8 count 1 size 56 timeout 1

Step 4: Ping IP address 8.8.8.8 from DUT1:

admin@DUT1$ ping 8.8.8.8 count 1 size 56 timeout 1