nsm
- service nsm
- SDE
M10-Smart
M2
RS420
Applications’ configuration
- service nsm log-level <txt>
- SDE
M10-Smart
M2
RS420
Applications’ log-level
- Values
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warning – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- service nsm operation <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Probe operation id
- Instances
Multiple
- Required
- Required
- service nsm operation <txt> alarm <txt>
- SDE
M10-Smart
M2
RS420
Operation’s alarms “This node must have the name of an alarm”
- Reference
- Instances
Multiple
- Required
- service nsm operation <txt> alarm <txt> activate
- SDE
M10-Smart
M2
RS420
Operation’s thresholds to activate alarm
- service nsm operation <txt> alarm <txt> activate jitter <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm jitter activation threshold (s) Float positive value (s)
- service nsm operation <txt> alarm <txt> activate loss <float>
- SDE
M10-Smart
M2
RS420
Operation’s alarm loss threshold activation threshold (%)
- Values
float – Percent value (0-100)
- service nsm operation <txt> alarm <txt> activate rtt <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm RTT threshold activation threshold (s) Float positive value (s)
- service nsm operation <txt> alarm <txt> activate rtt-jitter <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm rtt-jitter activation threshold (s) Float positive value (s)
- service nsm operation <txt> alarm <txt> activate stabilization-time <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm time that takes to be activated after threshold trigger (s) Float positive value (s)
- service nsm operation <txt> alarm <txt> deactivate
- SDE
M10-Smart
M2
RS420
Operation’s threshold to deactivate alarm
- service nsm operation <txt> alarm <txt> deactivate jitter <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm jitter deactivation threshold (s)
- service nsm operation <txt> alarm <txt> deactivate loss <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm loss deactivation threshold (%)
- service nsm operation <txt> alarm <txt> deactivate rtt <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm RTT threshold deactivation (deactivation threshold s)
- service nsm operation <txt> alarm <txt> deactivate rtt-jitter <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm rtt-jitter deactivation threshold (s)
- service nsm operation <txt> alarm <txt> deactivate stabilization-time <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s alarm time that takes to be deactivated after threshold trigger (s) Float positive value (s)
- service nsm operation <txt> alarm <txt> window <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Operation’s alarm packet window (must be lower than main one) Integer greater than or equal to 2
- service nsm operation <txt> description <txt>
- SDE
M10-Smart
M2
RS420
- Values
txt – Short description
- service nsm operation <txt> destination-address <fqdn|ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
- Values
fqdn – Operation’s destination address
ipv4 – Operation’s destination address
ipv6 – Operation’s destination address
- service nsm operation <txt> destination-port <u32>
- SDE
M10-Smart
M2
RS420
Operation’s destination port
- Values
u32 – Numeric IP port (1-65535)
- service nsm operation <txt> interval <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s interval (s) Float positive value (s)
- service nsm operation <txt> local-address <ipv4|ipv6>
- SDE
M10-Smart
M2
RS420
- Values
ipv4 – Operation’s local socket address
ipv6 – Operation’s local socket address
- Local IP address
- service nsm operation <txt> local-interface <ifc>
- SDE
M10-Smart
M2
RS420
- Values
ifc – Operation’s local interface
- service nsm operation <txt> local-port <u32>
- SDE
M10-Smart
M2
RS420
Operation’s local port
- Values
u32 – Numeric IP port (1-32767)
u32 – Numeric IP port (60000-65535)
- service nsm operation <txt> local-vrf <id>
- SDE
M10-Smart
M2
RS420
Operation’s local vrf
- Reference
- service nsm operation <txt> mark <int>
- SDE
M10-Smart
M2
RS420
Operation’s packet mark
- Values
int – Decimal or hexadecimal mark value (0-0xffffffff)
- service nsm operation <txt> size <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Operation’s packet size
- service nsm operation <txt> timeout <float>
- SDE
M10-Smart
M2
RS420
- Values
float – Operation’s timeout (s) Float positive value (s)
- service nsm operation <txt> tos <int>
- SDE
M10-Smart
M2
RS420
Operation’s ToS value
- Values
int – Decimal or hexadecimal mark value (0-0xff)
- service nsm operation <txt> ttl <u32>
- SDE
M10-Smart
M2
RS420
Operation’s TTL value
- Values
u32 – Numeric TTL value (1-255)
- service nsm operation <txt> type <txt>
- SDE
M10-Smart
M2
RS420
Operation’s transport type
- Values
icmp – Use ICMP packets
udp – Use SLA UDP packets
twamp – Use TWAMP-test packets (rfc5357)
- service nsm operation <txt> vrf-mark <id>
- SDE
M10-Smart
M2
RS420
Operation’s mark vrf routing table
- Reference
- service nsm operation <txt> window <u32>
- SDE
M10-Smart
M2
RS420
- Values
u32 – Operation’s packet window Integer greater than or equal to 2
- service nsm responder
- SDE
M10-Smart
M2
RS420
Responder service
- Required
- service nsm responder port <u32>
- SDE
M10-Smart
M2
RS420
Responder service permanent port
- Values
u32 – Numeric IP port (1-32767)
u32 – Numeric IP port (60000-65535)