bonding

interfaces bonding <txt>
SDE

Bonding interface name

Values:

  • bondN – Bonding interface name

Instances:

Multiple

interfaces bonding <txt> address <ipv4cidr|ipv6cidr|id>
SDE

IP address

Values:

  • ipv6cidr – IPv6 address and prefix length

  • dhcpv6 – Dynamic Host Configuration Protocol for IPv6

  • ipv4cidr – IPv4 address and prefix length

  • dhcp – Dynamic Host Configuration Protocol

Instances:

Multiple

interfaces bonding <txt> alarm
SDE

Enable or disable alarm according the link state

interfaces bonding <txt> alarm down <txt>
SDE

Alarm to be enabled if the link is down

Reference:

system alarm <txt>

interfaces bonding <txt> arp-monitor
SDE

Enable ARP link monitoring (MII monitor will be automatically disabled)

interfaces bonding <txt> arp-monitor interval <u32>
SDE

ARP link monitoring frequency in milliseconds

Values:

  • u32 – Miliseconds (1-2147483647)

interfaces bonding <txt> arp-monitor target <ipv4>
SDE
Values:

  • ipv4 – IP address to use for ARP monitoring

Instances:

Multiple

interfaces bonding <txt> description <id>
SDE

Description

Values:

  • id – “Interface description is too long (limit 256 characters)” (1-256)

interfaces bonding <txt> dhcp
SDE

Dynamic Host Configuration Protocol configuration

interfaces bonding <txt> dhcp client
SDE

DHCP client configuration

interfaces bonding <txt> dhcp client fallback <ipv4cidr|ipv6cidr>
SDE
Values:

  • ipv4cidr – Fallback IP address

  • ipv6cidr – Fallback IP address

interfaces bonding <txt> dhcp client rfc3442-routes
SDE

Install RFC3442 routes received from DHCP server

interfaces bonding <txt> dhcp client send
SDE

Send user-defined options to the DHCP server

interfaces bonding <txt> dhcp client send dhcp-client-identifier
SDE

Include the ‘dhcp-client-identifier’ option

Instances:

Unique

interfaces bonding <txt> dhcp client send dhcp-client-identifier base-mac
SDE

Use device base mac as identifier

interfaces bonding <txt> dhcp client send dhcp-client-identifier serial-number
SDE

Use device serial number as identifier

interfaces bonding <txt> dhcp client send dhcp-client-identifier string <id>
SDE

Use a string as identifier

Values:

  • id – Identifier string (1-255)

interfaces bonding <txt> dhcp client send vendor-class-identifier
SDE

Include the ‘vendor-class-identifier’ option

Instances:

Unique

interfaces bonding <txt> dhcp client send vendor-class-identifier string <id>
SDE

Use a string as identifier

Values:

  • id – Identifier string (1-255)

interfaces bonding <txt> dhcpv6
SDE

Dynamic Host Configuration Protocol v6 configuration

interfaces bonding <txt> dhcpv6 client
SDE

DHCPv6 client configuration

interfaces bonding <txt> dhcpv6 client parameters-only
SDE

Acquire only config parameters, not address

interfaces bonding <txt> dhcpv6 client send
SDE

Send user-defined options to the DHCPv6 server

interfaces bonding <txt> dhcpv6 client send duid <id>
SDE
Values:

  • id – DHCPv6 DUID to be sent by dhcpv6 client

interfaces bonding <txt> dhcpv6 client temporary
SDE

IPv6 “temporary” address

interfaces bonding <txt> disable
SDE

Disable interface

interfaces bonding <txt> disable advisor <txt>
SDE

Advisor to enable or disable the interface

Reference:

system advisor <txt>

interfaces bonding <txt> flow
SDE

Active netflow on interface

interfaces bonding <txt> flow egress
SDE

Active output traffic

interfaces bonding <txt> flow egress selector <txt>
SDE

Traffic selector

Reference:

traffic selector <txt>

interfaces bonding <txt> flow ingress
SDE

Active input traffic

interfaces bonding <txt> flow ingress selector <txt>
SDE

Traffic selector

Reference:

traffic selector <txt>

interfaces bonding <txt> hash-policy <txt>
SDE

Bonding transmit hash policy

Values:

  • layer2 – use MAC addresses to generate the hash (802.3ad)

  • layer2+3 – combine MAC address and IP address to make hash

  • layer3+4 – combine IP address and port to make hash

interfaces bonding <txt> ip
SDE

IPv4 routing parameters

interfaces bonding <txt> ip arp
SDE

ARP options

interfaces bonding <txt> ip arp ignore
SDE

Enable arp-ignore on this interface

interfaces bonding <txt> ip arp no-filter
SDE

Disable arp-filter on this interface

interfaces bonding <txt> ip arp no-notify
SDE

Disable arp_notify on this interface

interfaces bonding <txt> ip arp proxy
SDE

Enable proxy-arp on this interface

interfaces bonding <txt> ip arp pvlan-proxy
SDE

Enable private VLAN proxy ARP on this interface

interfaces bonding <txt> ip arp static <ipv4>
SDE

Static ARP translation

Values:

  • ipv4 – IPv4 address to add in ARP table

Instances:

Multiple

Required:

interfaces bonding <txt> ip arp static <ipv4> mac <macaddr>
SDE
Values:

  • macaddr – MAC address

interfaces bonding <txt> ip arp timeout <u32>
SDE
Values:

  • u32 – ARP cache entry timeout in seconds

interfaces bonding <txt> ip igmp
SDE

Internet Group Management Protocol (IGMP) parameters

interfaces bonding <txt> ip igmp join <ipv4>
SDE

Join multicast group

Values:

  • ipv4 – Join multicast group on this interface

interfaces bonding <txt> ip igmp last-member-query-count <u32>
SDE

IGMP last member query count

Values:

  • u32 – IGMP last member query count (1-255)

interfaces bonding <txt> ip igmp last-member-query-interval <u32>
SDE

IGMP last member query interval

Values:

  • u32 – IGMP last member query interval in deciseconds (1-65535)

interfaces bonding <txt> ip igmp query-interval <u32>
SDE

IGMP query interval

Values:

  • u32 – IGMP query interval in seconds (1-65535)

interfaces bonding <txt> ip igmp query-max-response-time <u32>
SDE

IGMP query response timeout value

Values:

  • u32 – IGMP query response timeout value in deciseconds (1-65535)

interfaces bonding <txt> ip igmp version <u32>
SDE

IGMP version

Values:

  • u32 – IGMP version used on this interface (2-3)

interfaces bonding <txt> ip multicast
SDE

Multicast parameters

interfaces bonding <txt> ip multicast boundary-list <txt>
SDE

Prefix-list to control for which groups to accept or ignore received PIM join or IGMP report messages

Reference:

protocols ip prefix-list <txt>

interfaces bonding <txt> ip ospf
SDE

Open Shortest Path First (OSPF) parameters

interfaces bonding <txt> ip ospf authentication
SDE

OSPF interface authentication

interfaces bonding <txt> ip ospf authentication encrypted-password <password>
SDE
Values:

  • password – Encrypted password

interfaces bonding <txt> ip ospf authentication message-digest <id>
SDE

MD5 authentication parameters

Values:

  • id – MD5 ID number (1-255)

Instances:

Multiple

interfaces bonding <txt> ip ospf authentication message-digest <id> encrypted-password <password>
SDE
Values:

  • password – MD5 encrypted key

interfaces bonding <txt> ip ospf authentication message-digest <id> password <txt>
SDE

MD5 key

Values:

  • txt – MD5 Key (1-16)

interfaces bonding <txt> ip ospf authentication password <txt>
SDE
Values:

  • txt – Plain text password

interfaces bonding <txt> ip ospf bandwidth <u32>
SDE

Bandwidth of interface (kilobits/sec)

Values:

  • u32 – Bandwidth in kilobits/sec (for calculating OSPF cost) (1-10000000)

interfaces bonding <txt> ip ospf cost <u32>
SDE

Interface cost

Values:

  • u32 – OSPF interface cost (1-65535)

interfaces bonding <txt> ip ospf dead-interval <u32>
SDE

Interval after which neighbor is dead

Values:

  • u32 – OSPF dead interval in seconds (1-65535)

interfaces bonding <txt> ip ospf hello-interval <u32>
SDE

Interval between hello packets

Values:

  • u32 – Interval between OSPF hello packets in seconds (1-65535)

interfaces bonding <txt> ip ospf mtu-ignore
SDE

Disable Maximum Transmission Unit (MTU) mismatch detection

interfaces bonding <txt> ip ospf network <id>
SDE

Network type

Values:

  • broadcast – Broadcast network type

  • non-broadcast – Non-broadcast network type

  • point-to-multipoint – Point-to-multipoint network type

  • point-to-point – Point-to-point network type

interfaces bonding <txt> ip ospf priority <u32>
SDE

Router priority

Values:

  • u32 – Priority (0-255)

interfaces bonding <txt> ip ospf retransmit-interval <u32>
SDE

Interval between retransmitting lost link state advertisements

Values:

  • u32 – Retransmit interval in seconds (3-65535)

interfaces bonding <txt> ip ospf transmit-delay <u32>
SDE

Link state transmit delay

Values:

  • u32 – Transmit delay in seconds (1-65535)

interfaces bonding <txt> ip pim
SDE

Protocol Independent Multicast (PIM) parameters

interfaces bonding <txt> ip pim disable-bsm
SDE

Disable sending and receiving bootstrap messages

interfaces bonding <txt> ip pim disable-unicast-bsm
SDE

Disable sending and receiving unicast bootstrap messages

interfaces bonding <txt> ip pim drpriority <u32>
SDE

PIM Designated Router (DR) priority

Values:

  • u32 – PIM DR priority for the interface (1-4294967295)

interfaces bonding <txt> ip pim hello <u32>
SDE

PIM hello interval

Values:

  • u32 – PIM hello interval in seconds (1-255)

interfaces bonding <txt> ip pim passive
SDE

Disable sending and receiving all PIM control messages (such as: ASSERT, BSM, HELLO, JOIN, PRUNE, REGISTER, REGISTER-STOP)

interfaces bonding <txt> ip reverse-path-filter <id>
SDE

Policy for source validation by reversed path, as specified in RFC3704

Values:

  • strict – Enable Strict Reverse Path Forwarding as defined in RFC3704

  • loose – Enable Loose Reverse Path Forwarding as defined in RFC3704

  • disable – No source validation

interfaces bonding <txt> ip rip
SDE

Routing Information Protocol (RIP) parameters

interfaces bonding <txt> ip rip authentication
SDE

Authentication method

interfaces bonding <txt> ip rip authentication encrypted-password <password>
SDE
Values:

  • password – Encrypted password

interfaces bonding <txt> ip rip authentication message-digest <u32>
SDE

MD5 authentication parameters

Values:

  • u32 – MD5 ID number (1-255)

Instances:

Multiple

interfaces bonding <txt> ip rip authentication message-digest <u32> encrypted-password <password>
SDE
Values:

  • password – MD5 encrypted key

interfaces bonding <txt> ip rip authentication message-digest <u32> password <txt>
SDE

MD5 key

Values:

  • txt – MD5 Key (1-16)

interfaces bonding <txt> ip rip authentication password <txt>
SDE

Plain text password

Values:

  • txt – Plain text password (1-16)

interfaces bonding <txt> ip rip split-horizon
SDE

Split horizon parameters

interfaces bonding <txt> ip rip split-horizon disable
SDE

Disable split horizon on specified interface

interfaces bonding <txt> ip rip split-horizon poison-reverse
SDE

Enable poison reverse for split-horizon

interfaces bonding <txt> ipv6
SDE

IPv6 routing parameters

interfaces bonding <txt> ipv6 address
SDE

IPv6 address auto-configuration modes

interfaces bonding <txt> ipv6 address autoconf
SDE

Enable acquisition of IPv6 address using stateless autoconfig

interfaces bonding <txt> ipv6 address eui64 <ipv6net>
SDE

Assign IPv6 address using EUI-64 based on MAC address

Values:

  • ipv6net – 64-bit IPv6 prefix to use with EUI-64 to make address

Instances:

Multiple

interfaces bonding <txt> ipv6 address prefix-from-provider <id>
SDE
Values:

  • id – IPv6 from Learned Prefix

Instances:

Multiple

interfaces bonding <txt> ipv6 address prefix-from-provider <id> ifc-ID <ipv6net>
SDE

Assign IPv6 address using Learned Prefixes

Values:

  • < – 64-bit IPv6 prefix (:h:h:h:h/64>)

Instances:

Multiple

interfaces bonding <txt> ipv6 dhcp-client-pd <id>
SDE
Values:

  • id – Name of learned prefix from provider

interfaces bonding <txt> ipv6 disable-forwarding
SDE

Disable IPv6 forwarding on this interface only

interfaces bonding <txt> ipv6 dup-addr-detect-transmits <u32>
SDE

Number of NS messages to send while performing DAD

Values:

  • u32 – Number of NS messages to send while performing DAD (0-2147483647)

interfaces bonding <txt> ipv6 ospfv3
SDE

IPv6 Open Shortest Path First (OSPFv3) parameters

interfaces bonding <txt> ipv6 ospfv3 area <u32|ipv4>
SDE

OSPFv3 Area

Values:

  • u32 – OSPFv3 area in decimal notation (0-4294967295)

  • ipv4 – OSPFv3 area in dotted decimal notation

interfaces bonding <txt> ipv6 ospfv3 authentication
SDE

OSPFv3 interface authentication

Instances:

Unique

interfaces bonding <txt> ipv6 ospfv3 authentication hmac-sha-256 <u32>
SDE

HMAC-SHA-256 authentication parameters

Values:

  • u32 – HMAC-SHA-256 key ID (1-65535)

Instances:

Multiple

interfaces bonding <txt> ipv6 ospfv3 authentication hmac-sha-256 <u32> encrypted-password <password>
SDE
Values:

  • password – HMAC-SHA-256 encrypted password

interfaces bonding <txt> ipv6 ospfv3 authentication hmac-sha-256 <u32> password <txt>
SDE

HMAC-SHA-256 plain text password

Values:

  • txt – HMAC-SHA-256 plain text password (1-16)

interfaces bonding <txt> ipv6 ospfv3 authentication md5 <u32>
SDE

MD5 authentication parameters

Values:

  • u32 – MD5 key ID (1-65535)

Instances:

Multiple

interfaces bonding <txt> ipv6 ospfv3 authentication md5 <u32> encrypted-password <password>
SDE
Values:

  • password – MD5 encrypted password

interfaces bonding <txt> ipv6 ospfv3 authentication md5 <u32> password <txt>
SDE

MD5 plain text password

Values:

  • txt – MD5 plain text password (1-16)

interfaces bonding <txt> ipv6 ospfv3 cost <u32>
SDE

Interface cost

Values:

  • u32 – OSPFv3 cost (1-65535)

interfaces bonding <txt> ipv6 ospfv3 dead-interval <u32>
SDE

Interval after which neighbor is declared dead

Values:

  • u32 – Neighbor dead interval in seconds (1-65535)

interfaces bonding <txt> ipv6 ospfv3 hello-interval <u32>
SDE

Interval between hello packets

Values:

  • u32 – Interval between OSPFv3 hello packets in seconds (1-65535)

interfaces bonding <txt> ipv6 ospfv3 ifmtu <u32>
SDE

Interface MTU

Values:

  • u32 – Interface MTU value (1-65535)

interfaces bonding <txt> ipv6 ospfv3 instance-id <u32>
SDE

Instance identifier

Values:

  • u32 – Instance ID (0-255)

interfaces bonding <txt> ipv6 ospfv3 mtu-ignore
SDE

Disable Maximum Transmission Unit mismatch detection

interfaces bonding <txt> ipv6 ospfv3 network <id>
SDE

Network type

Values:

  • broadcast – Broadcast network type

  • point-to-point – Point-to-point network type

interfaces bonding <txt> ipv6 ospfv3 passive
SDE

Disable forming of adjacency

interfaces bonding <txt> ipv6 ospfv3 priority <u32>
SDE

Router priority

Values:

  • u32 – Priority (0-255)

interfaces bonding <txt> ipv6 ospfv3 retransmit-interval <u32>
SDE

Interval between retransmitting lost link state advertisements

Values:

  • u32 – Retransmit interval in seconds (3-65535)

interfaces bonding <txt> ipv6 ospfv3 transmit-delay <u32>
SDE

Link state transmit delay

Values:

  • u32 – Link state transmit delay in seconds (1-65535)

interfaces bonding <txt> ipv6 ripng
SDE

Routing Information Protocol (RIPng)

interfaces bonding <txt> ipv6 ripng split-horizon
SDE

Split horizon parameters

interfaces bonding <txt> ipv6 ripng split-horizon disable
SDE

Disable split horizon

interfaces bonding <txt> ipv6 ripng split-horizon poison-reverse
SDE

Enable poison reverse for split-horizon

interfaces bonding <txt> ipv6 router-advert
SDE

Configure parameters for sending Router Advertisements (RAs)

interfaces bonding <txt> ipv6 router-advert cur-hop-limit <u32>
SDE

Value to be placed in the Current Hop Limit field in RAs

Values:

  • u32 – Value to place in the Current Hop Limit field in RAs (0-255)

interfaces bonding <txt> ipv6 router-advert default-lifetime <u32>
SDE

Value to be placed in Router Lifetime field in RAs

Values:

  • u32 – Value in seconds to be placed in Router Lifetime field in RAs (4-9000)

  • u32 – This means “not a default router”, in Router Lifetime field (0)

interfaces bonding <txt> ipv6 router-advert default-preference <txt>
SDE

Default router preference

Values:

  • low – Default router is low preference

  • medium – Default router is medium preference

  • high – Default router is high preference

SDE

Value of link MTU to place in RAs

Values:

  • u32 – Do not send MTU options in RAs (0)

  • u32 – Value of link MTU to place in RAs (1280-2147483647)

interfaces bonding <txt> ipv6 router-advert managed-flag <txt>
SDE
Values:

  • txt – Value for “managed address configuration” flag in RAs

interfaces bonding <txt> ipv6 router-advert max-interval <u32>
SDE

Maximum interval between unsolicited multicast RAs

Values:

  • u32 – Maximum interval in seconds between unsolicited multicast RAs (4-1800)

interfaces bonding <txt> ipv6 router-advert min-interval <u32>
SDE

Minimum interval between unsolicited multicast RAs

Values:

  • u32 – Minimum interval in seconds between unsolicited multicast RAs (3-1350)

interfaces bonding <txt> ipv6 router-advert name-server <ipv6>
SDE
Values:

  • ipv6 – IPv6 address of a Recursive DNS Server

Instances:

Multiple

interfaces bonding <txt> ipv6 router-advert other-config-flag <txt>
SDE
Values:

  • txt – Value to be placed in the “other configuration” flag in RAs

interfaces bonding <txt> ipv6 router-advert prefix <ipv6net>
SDE

IPv6 prefix to be advertised in Router Advertisements (RAs)

Values:

  • ipv6net – IPv6 prefix to be advertized in Router Advertisements (RAs)

Instances:

Multiple

interfaces bonding <txt> ipv6 router-advert prefix <ipv6net> autonomous-flag <txt>
SDE
Values:

  • txt – Whether prefix can be used for address auto-configuration

SDE
Values:

  • txt – Flag that prefix can be used for on-link determination

interfaces bonding <txt> ipv6 router-advert prefix <ipv6net> preferred-lifetime <u32|id>
SDE

Time in seconds that the prefix will remain preferred

Values:

  • u32 – Time in seconds that the prefix will remain preferred (0-2147483647)

  • infinity – Prefix will remain preferred forever

interfaces bonding <txt> ipv6 router-advert prefix <ipv6net> valid-lifetime <u32|id>
SDE

Time in seconds that the prefix will remain valid

Values:

  • u32 – Time in seconds that the prefix will remain valid (0-2147483647)

  • infinity – Prefix will remain valid forever

interfaces bonding <txt> ipv6 router-advert reachable-time <u32>
SDE

Value to be placed in “Reachable Time” field in RAs

Values:

  • u32 – Reachable Time value in RAs (in milliseconds) (1-3600000)

  • u32 – Reachable Time 0 (i.e., unspecified by this router) (0)

interfaces bonding <txt> ipv6 router-advert retrans-timer <u32>
SDE

Value to place in “Retrans Timer” field in RAs.

Values:

  • u32 – Value in milliseconds to place in “Retrans Timer” field in RAs (0-2147483647)

interfaces bonding <txt> ipv6 router-advert send-advert <txt>
SDE
Values:

  • txt – Enable/disable sending RAs

interfaces bonding <txt> ipv6 router-advert used-prefixes
SDE

Delegate prefixes used on the interface

interfaces bonding <txt> ipv6 router-advert used-prefixes autonomous-flag <txt>
SDE
Values:

  • txt – Whether prefix can be used for address auto-configuration

SDE
Values:

  • txt – Flag that prefix can be used for on-link determination

interfaces bonding <txt> ipv6 router-advert used-prefixes preferred-lifetime <u32|id>
SDE

Time in seconds that the prefix will remain preferred

Values:

  • u32 – Time in seconds that the prefix will remain preferred (0-2147483647)

  • infinity – Prefix will remain preferred forever

interfaces bonding <txt> ipv6 router-advert used-prefixes valid-lifetime <u32|id>
SDE

Time in seconds that the prefix will remain valid

Values:

  • u32 – Time in seconds that the prefix will remain valid (0-2147483647)

  • infinity – Prefix will remain valid forever

interfaces bonding <txt> miimon <u32>
SDE

MII link monitoring frequency

Values:

  • u32 – Miliseconds (1-2147483647)

interfaces bonding <txt> mode <txt>
SDE

Bonding mode

Values:

  • 802.3ad – IEEE 802.3ad Dynamic link aggregation

  • active-backup – Fault tolerant: only one port in the bond is active

  • broadcast – Fault tolerant: transmit everything through all port interfaces

  • round-robin – Load balance: transmit packets in sequential order

  • transmit-load-balance – Load balance: adapt based on transmit load and speed

  • adaptive-load-balance – Load balance: adapt based on transmit and receive plus ARP

  • xor-hash – Load balance: distribute based on MAC address

interfaces bonding <txt> primary <txt>
SDE

Primary device interface

Reference:

interfaces ethernet <txt>

interfaces bonding <txt> tcp-mss <u32>
SDE
Values:

  • u32 – Change tcp-mss value

interfaces bonding <txt> traffic
SDE

Traffic processing options

interfaces bonding <txt> traffic control
SDE

Traffic control for interface

interfaces bonding <txt> traffic control in <id>
SDE

Ingress traffic control for interface

Reference:

traffic control <id>

interfaces bonding <txt> traffic control out <id>
SDE

Egress traffic control for interface

Reference:

traffic control <id>

interfaces bonding <txt> traffic nat
SDE

Network Address Translation (NAT) parameters

interfaces bonding <txt> traffic nat destination
SDE

Destination NAT settings

interfaces bonding <txt> traffic nat destination rule <u32>
SDE

Rule number for NAT

Values:

  • u32 – Number for this NAT rule (1-9999)

Instances:

Multiple

interfaces bonding <txt> traffic nat destination rule <u32> address <ipv4|ipv4net|ipv4range|id>
SDE

IP address, subnet, range or redirect

Values:

  • ipv4 – NAT to the specified IP address

  • ipv4net – NAT to the specified network address

  • ipv4range – NAT to the specified IP range

  • redirect – NAT to the interface address

interfaces bonding <txt> traffic nat destination rule <u32> description <txt>
SDE
Values:

  • txt – Rule description

interfaces bonding <txt> traffic nat destination rule <u32> log
SDE

Log packets to which this rule has been applied

interfaces bonding <txt> traffic nat destination rule <u32> log level <txt>
SDE

Loggin level

Values:

  • emerg – Emergency messages

  • alert – Urgent messages

  • crit – Critical messages

  • err – Error messages

  • warn – Warning messages

  • notice – Messages for further investigation

  • info – Informational messages

  • debug – Debug messages

interfaces bonding <txt> traffic nat destination rule <u32> log prefix <txt>
SDE
Values:

  • txt – Log message prefix text, up to 29 characters

interfaces bonding <txt> traffic nat destination rule <u32> network <ipv4net>
SDE

IP prefix to use in translation (host part is kept)

Values:

  • ipv4net – NAT to the specified network address, host part of the address will remain unchanged

interfaces bonding <txt> traffic nat destination rule <u32> port <u32|id>
SDE

NAT port

Values:

  • u32 – Port to use in PAT (1-65535)

  • range – Port range (pool, for example, 1001-1005)

interfaces bonding <txt> traffic nat destination rule <u32> protocol <txt>
SDE
Values:

  • txt – NAT transport protocol

interfaces bonding <txt> traffic nat destination rule <u32> selector <txt>
SDE

Traffic selector

Reference:

traffic selector <txt>

interfaces bonding <txt> traffic nat source
SDE

Source NAT settings

interfaces bonding <txt> traffic nat source rule <u32>
SDE

Rule number for NAT

Values:

  • u32 – Number for this NAT rule (1-9999)

Instances:

Multiple

interfaces bonding <txt> traffic nat source rule <u32> address <ipv4|ipv4net|ipv4range|id>
SDE

IP address, subnet, range or masquerade

Values:

  • ipv4 – NAT to the specified IP address

  • ipv4net – NAT to the specified network address

  • ipv4range – NAT to the specified IP range

  • masquerade – NAT to the interface address

interfaces bonding <txt> traffic nat source rule <u32> description <txt>
SDE
Values:

  • txt – Rule description

interfaces bonding <txt> traffic nat source rule <u32> log
SDE

Log packets to which this rule has been applied

interfaces bonding <txt> traffic nat source rule <u32> log level <txt>
SDE

Loggin level

Values:

  • emerg – Emergency messages

  • alert – Urgent messages

  • crit – Critical messages

  • err – Error messages

  • warn – Warning messages

  • notice – Messages for further investigation

  • info – Informational messages

  • debug – Debug messages

interfaces bonding <txt> traffic nat source rule <u32> log prefix <txt>
SDE
Values:

  • txt – Log message prefix text, up to 29 characters

interfaces bonding <txt> traffic nat source rule <u32> network <ipv4net>
SDE

IP prefix to use in translation (host part is kept)

Values:

  • ipv4net – NAT to the specified network address, host part of the address will remain unchanged

interfaces bonding <txt> traffic nat source rule <u32> port <u32|id>
SDE

NAT port

Values:

  • u32 – Port to use in PAT (1-65535)

  • range – Port range (pool, for example, 1001-1005)

interfaces bonding <txt> traffic nat source rule <u32> protocol <txt>
SDE
Values:

  • txt – NAT transport protocol

interfaces bonding <txt> traffic nat source rule <u32> selector <txt>
SDE

Traffic selector

Reference:

traffic selector <txt>

interfaces bonding <txt> traffic policy
SDE

Traffic policy rulesets for interface

interfaces bonding <txt> traffic policy in <txt>
SDE

Input traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces bonding <txt> traffic policy in <txt> priority <txt>
SDE

Priority order for traffic policy

Values:

  • very-high – First policy executed before NAT

  • high – Second policy executed before NAT

  • low – First policy executed after NAT

  • very-low – Second policy executed after NAT

interfaces bonding <txt> traffic policy local-in <txt>
SDE

Local input traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces bonding <txt> traffic policy local-in <txt> priority <txt>
SDE

Priority order for traffic policy

Values:

  • very-high – First policy executed

  • high – Second policy executed

  • low – Third policy executed

  • very-low – Fourth policy executed

interfaces bonding <txt> traffic policy local-out <txt>
SDE

Local output traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces bonding <txt> traffic policy local-out <txt> priority <txt>
SDE

Priority order for traffic policy

Values:

  • very-high – First policy executed

  • high – Second policy executed

  • low – Third policy executed

  • very-low – Fourth policy executed

interfaces bonding <txt> traffic policy out <txt>
SDE

Output traffic policy ruleset for interface

Reference:

traffic policy <txt>

Instances:

Multiple

interfaces bonding <txt> traffic policy out <txt> priority <txt>
SDE

Priority order for traffic policy

Values:

  • very-high – First policy executed before NAT

  • high – Second policy executed before NAT

  • low – First policy executed after NAT

  • very-low – Second policy executed after NAT

interfaces bonding <txt> traffic zone <txt>
SDE

Traffic zone associated with this interface

Reference:

traffic zone <txt>

interfaces bonding <txt> vrf <id>
SDE

Virtual Routing and Forwarding domain name

Reference:

system vrf <id>