snmp
- service snmp
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enable Simple Network Management Protocol (SNMP)
- service snmp community <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Create a new community
- Values:
txt – Community name (1-32)
- Instances:
Multiple
- service snmp community <txt> client <ipv4|ipv6|ipv4net|ipv6net>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
ipv4 – IP address of SNMP client allowed to contact system
ipv6 – IP address of SNMP client allowed to contact system
ipv4net – IP address of SNMP client allowed to contact system
ipv6net – IP address of SNMP client allowed to contact system
- Instances:
Multiple
- service snmp community <txt> notify-traps
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Set notify traps for this community
- service snmp community <txt> notify-traps advisor <id>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
id – Advisors to be notified for this community
- Instances:
Multiple
- service snmp community <txt> notify-traps alarm <id>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
id – Alarms to be notified for this community
- Instances:
Multiple
- service snmp community <txt> notify-traps link-down
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Link-down notification for this community. Reports an error in one of the router interfaces
- service snmp community <txt> notify-traps link-up
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Link-up notification for this community. Notifies that the down interface is now up and operating again
- service snmp community <txt> notify-traps mtc-probe
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
Power-switch (MTC+) notification for this community
- service snmp community <txt> notify-traps mtc-track
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
Power-switch (MTC+) notification for this community
- service snmp community <txt> read-write
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enable read-write access for this community. If this configuration isn’t set, the community will only be able to read.
- service snmp community <txt> view <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Set a view for this community
- Reference:
- service snmp engine-id <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Set Engine ID (SNMPv3)
- Values:
txt – Hex value (e.g., 0x80000009010a0101c1)
- service snmp listen
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Endpoints to listen for incoming SNMP requests (by default, on all interfaces on port 161)
- service snmp listen address <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
ipv4 – IPv4/IPv6 address to listen for incoming requests
ipv6 – IPv4/IPv6 address to listen for incoming requests
- Local IP address:
- Instances:
Multiple
- service snmp listen address <ipv4|ipv6> port <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Port to listen for incoming requests
- Values:
u32 – Numeric IP port (1-32767)
u32 – Numeric IP port (60000-65535)
- Instances:
Multiple
- service snmp listen port <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Port to listen for incoming requests (on all interfaces)
- Values:
u32 – Numeric IP port (1-32767)
u32 – Numeric IP port (60000-65535)
- Instances:
Multiple
- service snmp local-address <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Local IP address used to generate notifications
- Values:
ipv4 – IP address
ipv6 – IPv6 address
- Local IP address:
- service snmp local-vrf <id>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Bind to local Virtual Routing and Forwarding domain name
- Reference:
- service snmp log-level <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
SNMP log-level
- Values:
emerg – Emergency messages
alert – Urgent messages
crit – Critical messages
err – Error messages
warning – Warning messages
notice – Messages for further investigation
info – Informational messages
debug – Debug messages
- service snmp trap-target <fqdn|ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Address of notification target
- Values:
ipv4 – IPv4 address
ipv6 – IPv6 address
fqdn – Hostname
- Instances:
Multiple
- Required:
- service snmp trap-target <fqdn|ipv4|ipv6> version
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Version of SNMP to use
- Instances:
Unique
- service snmp trap-target <fqdn|ipv4|ipv6> version v1
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Use SNMPv1 (only traps notifications)
- Required:
- Required:
- service snmp trap-target <fqdn|ipv4|ipv6> version v1 community <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Community used when sending notification information
- Reference:
- service snmp trap-target <fqdn|ipv4|ipv6> version v1 port <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Destination port used for notification
- Values:
u32 – Numeric IP port (1-65535)
- service snmp trap-target <fqdn|ipv4|ipv6> version v1 source <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
ipv4 – Local IP address to use as source for notifications
ipv6 – Local IP address to use as source for notifications
- Local IP address:
- service snmp trap-target <fqdn|ipv4|ipv6> version v2c
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Use SNMPv2c
- Required:
- service snmp trap-target <fqdn|ipv4|ipv6> version v2c community <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Community used when sending notification information
- Reference:
- service snmp trap-target <fqdn|ipv4|ipv6> version v2c port <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Destination port used for notification
- Values:
u32 – Numeric IP port (1-65535)
- service snmp trap-target <fqdn|ipv4|ipv6> version v2c type <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Type of this notification
- Values:
trap – Traps are one-way communication
inform – Informs imply receiver acknowledgement
- service snmp trap-target <fqdn|ipv4|ipv6> version v3
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Use SNMPv3
- Required:
- service snmp trap-target <fqdn|ipv4|ipv6> version v3 port <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Destination port used for notification
- Values:
u32 – Numeric IP port (1-65535)
- service snmp trap-target <fqdn|ipv4|ipv6> version v3 type <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Type of this notification
- Values:
trap – Traps are one-way communication
inform – Informs imply receiver acknowledgement
- service snmp trap-target <fqdn|ipv4|ipv6> version v3 user <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
SNMPv3 user used when sending notification information
- Reference:
- service snmp user <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Create a new SNMPv3 user
- Values:
txt – Username (1-32)
- Instances:
Multiple
- service snmp user <txt> authentication
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enable authentication
- Required:
- Required:
- service snmp user <txt> authentication encrypted-password <password>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
password – Encrypted authentication key
- service snmp user <txt> authentication password <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Authentication key
- Values:
txt – Passphrase (between 8 and 32 characters) (8-32)
- service snmp user <txt> authentication protocol <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
txt – Authentication protocol
- service snmp user <txt> notify-traps
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Set notify traps for this user
- service snmp user <txt> notify-traps advisor <id>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
id – Advisors to be notified for this user
- Instances:
Multiple
- service snmp user <txt> notify-traps alarm <id>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
id – Alarms to be notified for this user
- Instances:
Multiple
- service snmp user <txt> notify-traps link-down
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Link-down notification for this user. Reports an error in one of the router interfaces
- service snmp user <txt> notify-traps link-up
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Link-up notification for this user. Notifies that the down interface is now up and operating again
- service snmp user <txt> notify-traps mtc-probe
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
Power-switch (MTC+) notification for this user
- service snmp user <txt> notify-traps mtc-track
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
Power-switch (MTC+) notification for this user
- service snmp user <txt> privacy
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enable privacy
- Required:
- Required:
- service snmp user <txt> privacy encrypted-password <password>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
password – Encrypted text password
- service snmp user <txt> privacy password <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Privacy key
- Values:
txt – Passphrase (between 8 and 32 characters) (8-32)
- service snmp user <txt> privacy protocol <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
txt – Privacy protocol
- service snmp user <txt> read-write
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enable read-write access for this user. If this configuration isn’t set, the user will only be able to read.
- service snmp user <txt> view <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Set a view for this user
- Reference:
- service snmp view <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Create a subset of the overall OID tree
- Values:
txt – View name (1-32)
- Instances:
Multiple
- Required:
- service snmp view <txt> oid <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
OID to include/exclude from the view
- Values:
txt – OID (e.g., 1.2.1.2)
- Instances:
Multiple
- service snmp view <txt> oid <txt> mask <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Bit-mask to set significant subidentifiers for this OID
- Values:
txt – OID bit-mask (e.g., 00:0f:aa)
- service snmp view <txt> oid <txt> type <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
txt – Include/exclude this OID