Check Connection Isolated Port

The following scenario shows how to isolate one of the switch ports to act as an Ethernet port.

Test Switch Isolate Port

Description

In this scenario the eth0p0 port of the switch is isolated (i.e., not attached to a bridge) and configured like any other Ethernet port.

Scenario

Step 1: Set the following configuration in DUT1:

set interfaces ethernet eth0 address 192.168.100.2/24
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT0:

set interfaces ethernet eth0p0 address 192.168.100.1/24
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Ping IP address 192.168.100.1 from DUT1:

admin@DUT1$ ping 192.168.100.1 count 1 size 56 timeout 1