ntp
- system ntp
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Network Time Protocol (NTP) configuration
- system ntp authenticate
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Authenticate option
- system ntp authenticate disable
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Disable authentication (enabled by default)
- system ntp authentication-key <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Key ID used for authentication
- Values:
u32 – Key ID (1-65534)
- Instances:
Multiple
- Required:
- system ntp authentication-key <u32> algorithm <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
txt – Algorithm to use for authentication
- system ntp authentication-key <u32> encrypted-key <password>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
password – Encrypted message for authentication
- system ntp authentication-key <u32> key <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
txt – Message for authentication
- system ntp broadcast <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Broadcast/Multicast mode association
“The IANA has assigned the multicast group address IPv4 224.0.1.1 and IPv6 ff05::101 exclusively to NTP”
- Values:
ipv4 – Broadcast/Multicast IP address
ipv6 – Broadcast/Multicast IPv6 address
- Instances:
Multiple
- system ntp broadcast <ipv4|ipv6> key <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Key ID used for authentication
- Values:
u32 – Key ID (1-65534)
- system ntp broadcast <ipv4|ipv6> max-poll <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Maximum poll interval in seconds as a power of two
- Values:
u32 – Maximum poll interval in seconds as a power of two (3-17)
- system ntp broadcast <ipv4|ipv6> min-poll <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Minimum poll interval in seconds as a power of two
- Values:
u32 – Minimum poll interval in seconds as a power of two (3-17)
- system ntp broadcast <ipv4|ipv6> ttl <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Time-to-life to use on broadcast/multicast server
- Values:
u32 – Time-to-life to use on broadcast/multicast server (0-7)
- system ntp broadcast <ipv4|ipv6> version <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
NTP version used
- Values:
u32 – NTP versions allowed (1-4)
- system ntp broadcast-client
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enables reception of broadcast server messages to any local interface
- system ntp broadcast-delay <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Network delay between the local and remote servers
- Values:
u32 – Delay in microseconds (3-7)
- system ntp client
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Network Time Protocol (NTP) client
- system ntp client address <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
IP address
- Values:
ipv4 – IP address
ipv6 – IPv6 address
- Instances:
Multiple
- system ntp logging
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
NTP logging
- Instances:
Unique
- system ntp logging all
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Apply log level to all existing types.
- system ntp logging type <txt>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Apply to specific log types.
- Values:
info – General information logs
events – General event logs
status – Status logs
statistics – Statistics logs
clock – Clock related logs
peer – Peer related logs
sys – System related logs
sync – Synchronization logs
- Instances:
List of values
- system ntp master
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Reference Clock
- system ntp master prefer
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Marks the Reference Clock as preferred
- system ntp master stratum <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Stratum number assigned to Reference Clock
- Values:
u32 – Stratum number (0-15)
- system ntp multicast-client <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enables reception of multicast server messages to the multicast group address(es) specified
- Values:
ipv4 – IP address
ipv6 – IPv6 address
- Instances:
Multiple
- system ntp peer <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Network Time Protocol (NTP) peer
- Values:
ipv4 – IP address
ipv6 – IPv6 address
- Instances:
Multiple
- system ntp peer <ipv4|ipv6> key <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Key ID used for authentication
- Values:
u32 – Key ID (1-65534)
- system ntp peer <ipv4|ipv6> local-address <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Local IP address to use as source for requests to this peer
- Values:
ipv4 – Local IPv4 address for this peer
ipv6 – Local IPv6 address for this peer
- Local IP address:
- system ntp peer <ipv4|ipv6> local-interface <ifc>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
ifc – Interface to use as source for requests to this peer
- system ntp peer <ipv4|ipv6> local-vrf <id>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
VRF where socket is bound
- Reference:
- system ntp peer <ipv4|ipv6> max-poll <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Maximum poll interval in seconds as a power of two
- Values:
u32 – Maximum poll interval in seconds as a power of two (3-17)
- system ntp peer <ipv4|ipv6> min-poll <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Minimum poll interval in seconds as a power of two
- Values:
u32 – Minimum poll interval in seconds as a power of two (3-17)
- system ntp peer <ipv4|ipv6> no-select
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Marks the server as unused
- system ntp peer <ipv4|ipv6> prefer
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Marks the server as preferred
- system ntp peer <ipv4|ipv6> version <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
NTP version used
- Values:
u32 – NTP versions allowed (1-4)
- system ntp server
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Network Time Protocol (NTP) server
- system ntp server address <fqdn|ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
fqdn – IP address or name of the server
ipv4 – IP address or name of the server
ipv6 – IP address or name of the server
- Instances:
Multiple
- system ntp server address <fqdn|ipv4|ipv6> burst
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Send a burst of eight packets when the server is reachable
- system ntp server address <fqdn|ipv4|ipv6> key <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Key-ID used for authentication
- Values:
u32 – Key ID (1-65534)
- system ntp server address <fqdn|ipv4|ipv6> local-address <ipv4|ipv6>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Local IP address to use as source for requests to this server
- Values:
ipv4 – Local IPv4 address for this server
ipv6 – Local IPv6 address for this server
- Local IP address:
- system ntp server address <fqdn|ipv4|ipv6> local-interface <ifc>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
ifc – Interface to use as source for requests to this server
- system ntp server address <fqdn|ipv4|ipv6> local-vrf <id>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
VRF where socket is bound
- Reference:
- system ntp server address <fqdn|ipv4|ipv6> max-poll <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Maximum poll interval in seconds as a power of two
- Values:
u32 – Maximum poll interval in seconds as a power of two (3-17)
- system ntp server address <fqdn|ipv4|ipv6> min-poll <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Minimum poll interval in seconds as a power of two
- Values:
u32 – Minimum poll interval in seconds as a power of two (3-17)
- system ntp server address <fqdn|ipv4|ipv6> no-select
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Marks the server as unused
- system ntp server address <fqdn|ipv4|ipv6> preempt
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Specifies the association as preemptable rather than the default persistent
- system ntp server address <fqdn|ipv4|ipv6> prefer
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Marks the server as preferred
- system ntp server address <fqdn|ipv4|ipv6> version <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
NTP version used
- Values:
u32 – NTP versions allowed (1-4)
- system ntp server dhcp
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Enable configuration discovery via DHCP options
- system ntp server dhcp interface <ifc>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
- Values:
ifc – Enable configuration discovery via DHCP for specified interface
- Instances:
Multiple
- system ntp trusted-key <u32>
- AresC640
Atlas840
M10-Smart
M2
RS420
RXL15000
SDE
Key(s) ID used for authentication
- Values:
u32 – Key ID (1-65534)
- Instances:
Multiple