Sip-Options

These scenarios check DHCP server SIP (Session Initiation Protocol) options. SIP is used for VoIP telephony and video conferencing systems. These options help IP phones and VoIP clients automatically discover SIP servers. This includes: sip-server-name and sip-server-address (both use option 120 with different encodings).

Test SIP-Server-Name Single

Description

This scenario checks the sip-server-name option with a single SIP server hostname. The DHCP server configures a SIP server by domain name, and the client receives it. SIP server names are encoded in a special hex format (Option 120, encoding type 0). This is used by VoIP phones to locate SIP/PBX servers by hostname.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-name subnet 10.0.0.0/24 options sip-server-name sip.example.com
set service dhcp-server shared-network sip-name subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test SIP-Server-Name Multiple

Description

This scenario checks the sip-server-name option with multiple SIP server hostnames. The DHCP server configures three SIP servers by domain name for redundancy. Multiple SIP servers provide failover for VoIP telephony systems.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 options sip-server-name sip-backup.example.com
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 options sip-server-name sip.example.com
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 options sip-server-name voip.example.com
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test SIP-Server-Name VRF

Description

This scenario checks the sip-server-name option when the DHCP server is configured with VRF. Multiple SIP server hostnames are configured in a VRF environment.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set interfaces ethernet eth0 vrf VRF0
set service dhcp-server shared-network sip-name-vrf local-vrf VRF0
set service dhcp-server shared-network sip-name-vrf subnet 10.0.0.0/24 options sip-server-name sip-backup.example.com
set service dhcp-server shared-network sip-name-vrf subnet 10.0.0.0/24 options sip-server-name sip.example.com
set service dhcp-server shared-network sip-name-vrf subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system vrf VRF0

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test SIP-Server-Address Single

Description

This scenario checks the sip-server-address option with a single SIP server IP address. The DHCP server configures a SIP server by IP address, and the client receives it. SIP server addresses are encoded in a special hex format (Option 120, encoding type 1). This is used by VoIP phones to locate SIP/PBX servers by IP.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-addr subnet 10.0.0.0/24 options sip-server-address 10.0.0.10
set service dhcp-server shared-network sip-addr subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test SIP-Server-Address Multiple

Description

This scenario checks the sip-server-address option with multiple SIP server IP addresses. The DHCP server configures three SIP servers by IP for redundancy. Multiple SIP servers provide failover for VoIP systems.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 options sip-server-address 10.0.0.10
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 options sip-server-address 10.0.0.11
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 options sip-server-address 10.0.0.12
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test SIP-Server-Address VRF

Description

This scenario checks the sip-server-address option when the DHCP server is configured with VRF. Multiple SIP server IP addresses are configured in a VRF environment.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set interfaces ethernet eth0 vrf VRF0
set service dhcp-server shared-network sip-addr-vrf local-vrf VRF0
set service dhcp-server shared-network sip-addr-vrf subnet 10.0.0.0/24 options sip-server-address 10.0.0.10
set service dhcp-server shared-network sip-addr-vrf subnet 10.0.0.0/24 options sip-server-address 10.0.0.11
set service dhcp-server shared-network sip-addr-vrf subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'
set system vrf VRF0

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test Change SIP-Server-Name

Description

This scenario checks that SIP server names can be changed dynamically. Configure an initial SIP server hostname, then add another and verify the update.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-name subnet 10.0.0.0/24 options sip-server-name sip.example.com
set service dhcp-server shared-network sip-name subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Step 5: Modify the following configuration lines in DUT0 :

set service dhcp-server shared-network sip-name subnet 10.0.0.0/24 options sip-server-name sip-backup.example.com

Step 6: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test Change SIP-Server-Address

Description

This scenario checks that SIP server addresses can be changed dynamically. Configure an initial SIP server IP, then add another and verify the update.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-addr subnet 10.0.0.0/24 options sip-server-address 10.0.0.10
set service dhcp-server shared-network sip-addr subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Step 5: Modify the following configuration lines in DUT0 :

set service dhcp-server shared-network sip-addr subnet 10.0.0.0/24 options sip-server-address 10.0.0.11

Step 6: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test Remove SIP-Server-Name

Description

This scenario checks that SIP server names can be removed. Configure SIP server hostnames, then remove them and verify they are no longer sent.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 options sip-server-name sip-backup.example.com
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 options sip-server-name sip.example.com
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 options sip-server-name voip.example.com
set service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Step 5: Modify the following configuration lines in DUT0 :

delete service dhcp-server shared-network sip-name-multi subnet 10.0.0.0/24 options

Step 6: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Test Remove SIP-Server-Address

Description

This scenario checks that SIP server addresses can be removed. Configure SIP server IPs, then remove them and verify they are no longer sent.

Scenario

Step 1: Set the following configuration in DUT0 :

set interfaces ethernet eth0 address 10.0.0.1/24
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 options sip-server-address 10.0.0.10
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 options sip-server-address 10.0.0.11
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 options sip-server-address 10.0.0.12
set service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 start 10.0.0.5 stop 10.0.0.5
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 2: Set the following configuration in DUT1 :

set interfaces ethernet eth0 address dhcp
set system login user admin authentication encrypted-password '$6$GSjsCj8gHLv$/VcqU6FLi6CT2Oxn0MJQ2C2tqnRDrYKNF8HIYWJp68nvXvPdFccDsT04.WtigUONbKYrgKg8d6rEs8PjljMkH0'

Step 3: Run command interfaces ethernet eth0 show at DUT1 and check if output contains the following tokens:

10.0.0.5

Step 4: Run command interfaces ethernet eth0 show at DUT1 and expect this output:

Step 5: Modify the following configuration lines in DUT0 :

delete service dhcp-server shared-network sip-addr-multi subnet 10.0.0.0/24 options

Step 6: Run command interfaces ethernet eth0 show at DUT1 and expect this output: