wlan
- controllers wlan
- M10-Smart
M2
RS420
Configuration of WLAN-device and radio-modules
- controllers wlan country <txt>
- M10-Smart
M2
RS420
Country selection
- Values:
txt – ISO 3166-1 alpha-2 country ID where the device is located (2)
- controllers wlan installation
- M10-Smart
M2
RS420
Device installation
- controllers wlan installation indoor
- M10-Smart
M2
RS420
Device operates indoors
- controllers wlan installation outdoor
- M10-Smart
M2
RS420
Device operates outdoors
- controllers wlan radios <txt>
- M10-Smart
M2
RS420
WLAN Radio device configuration
- Values:
txt – Radio device name
- Instances:
Multiple
- controllers wlan radios <txt> antenna-selection
- M10-Smart
M2
RS420
List of antennas to be used for sending/receiving
- controllers wlan radios <txt> antenna-selection rx <txt>
- M10-Smart
M2
RS420
List of antennas to be used for receiving (ALL if empty)
- Values:
txt – List of antenna names, comma-separated
- Instances:
Multiple
- controllers wlan radios <txt> antenna-selection tx <txt>
- M10-Smart
M2
RS420
List of antennas to be used for sending (ALL if empty)
- Values:
txt – List of antenna names, comma-separated
- Instances:
Multiple
- controllers wlan radios <txt> auto-channel-selection
- M10-Smart
M2
RS420
Settings for automatic channel selection
- controllers wlan radios <txt> auto-channel-selection blocked-channels <txt>
- M10-Smart
M2
RS420
Channels to avoid when performing auto-channel selection
- Values:
u32 – List of channels, comma-separated
- controllers wlan radios <txt> background-scanning
- M10-Smart
M2
RS420
Neighbor background scanning parameters
- controllers wlan radios <txt> background-scanning enable
- M10-Smart
M2
RS420
Enable neighbor background scanning on this radio module
- controllers wlan radios <txt> background-scanning sweep-interval <u32>
- M10-Smart
M2
RS420
Number of seconds the neighbors are kept in the database if not seen again
- Values:
u32 – Neighbors maximum age (60-86400)
- controllers wlan radios <txt> band <txt>
- M10-Smart
M2
RS420
WLAN frequency band where the radio device operates
- Values:
txt – Base frequency in Gigahertz
- controllers wlan radios <txt> beacon-interval <u32>
- M10-Smart
M2
RS420
Time between two consecutive beacon frames
- Values:
u32 – Time in milliseconds (40-3500)
- controllers wlan radios <txt> channel <txt>
- M10-Smart
M2
RS420
Operational 802.11 WLAN channel
- Values:
"auto" – Auto-channel selection
u32 – Channel number
- controllers wlan radios <txt> disable
- M10-Smart
M2
RS420
Disable radio device
- controllers wlan radios <txt> disable-short-gi
- M10-Smart
M2
RS420
Disable short guard-interval
- controllers wlan radios <txt> mode <txt>
- M10-Smart
M2
RS420
List of WLAN modes allowed by this radio device
- Values:
txt – 802.11 WLAN mode
- Instances:
Multiple
- controllers wlan radios <txt> tx-power
- M10-Smart
M2
RS420
Conducted transmission power used by the radio device
- controllers wlan radios <txt> tx-power dbm <txt>
- M10-Smart
M2
RS420
Conducted transmission power, in dBm, used by the radio device
- Values:
u32 – Transmission power in dBm